Metal plastic polymer
SF-1B oilless lubricating bearing (bronze base) Product parameters
| Name: | Custom Steel Bushings |
| Coefficient Of Friction: | 0.03~0.20 |
| Low Speed Operation: | 140N/mm2 |
| Application: | Home Appliance Equipment |
| Base Material: | Bronze Base Oilless Lubricating Bearing |
| Operating Temperature: | -195℃~+280℃ |
| Size: | Non Standard |
| Item: | Non Standard Bushings |
Substrate properties
It has the same material properties as the SF-1B oilless lubricated
bearing (bronze base), and because the bearing matrix replaces the
carbon steel substrate with bronze, it is more resistant to
corrosion than the SF-1B oilless lubricating bearing (bronze base).
High thermal conductivity, and the copper substrate also has good
magnetic resistance. It is necessary to consider that SF-1B oilless
lubricated bearings (bronze-based) products cannot be used with
aluminum base holes because of the risk of electrochemical
corrosion when used in all fields or at high humidity.
Material organization
1. PTFE/fiber mixture 0.01-0.03mm, a wear-resistant material, which
can form a transfer film during operation to protect the grinding
shaft and provide self-lubricating performance of the bearing.
2. Copper powder layer, 0.20-0.35mm, improves the bonding strength
of PTFE mixture and copper plate layer, and has good bearing
capacity and wear resistance. The higher thermal conductivity
allows for rapid transfer of heat generated during operation.
3. Copper substrate, improve bearing capacity and heat transfer,
and have better corrosion resistance.
Technical Parameters
| Bearer | Static bearing | 250N/mm2 | Coefficient of friction | 0.03~0.20 |
| Low speed operation | 140N/mm2 |
| Rotation, rocking motion | 60N/mm2 | Line speed | Dry friction | 2m/s |
| Fluid lubrication | >2m/s |
| PV value (dry friction) | Intermittent operation | 3.6N/mm2*m/3 | Thermal Conductivity | >2m/s42W(m*K)-1 |
| Long-term operation | 1.8N/mm2*m/3 |
| Operating temperature | -195℃~+280℃ | Linear expansion coefficient | 11*10-6*K |
Double metal bushings should be noted when selecting anti-rust oil
The bimetal bushing is a carbon steel matrix. The surface of the
bronze powder has low friction coefficient, good wear resistance,
long service life of the sliding bearing and good anti-seizure
performance. Therefore, when selecting anti-rust oil, attention
should be paid to:
1. Corrosion resistance of carbon steel;
2. Anti-rust performance of copper alloy;
3. Lubrication performance.
When selecting, it is recommended to apply two kinds of metal
anti-rust oil (the traditional anti-rust oil is basically only for
carbon steel), and the anti-rust oil should have certain
lubricating properties. One is to consider the applicable type of
multi-metal lubrication rust-proof oil, and the second is to buy a
composite oil-soluble corrosion inhibitor and engine oil, which can
be used after thorough mixing.
